Create PDF Recommend Print

Field Data Loggers

Sigra’s Field Data Logger is a low power, versatile, eight channel device designed to monitor four types of sensors:

  • Vibrating wire
  • Voltage        
  • Frequency
  • Resistance

and with external interfaces it may also be used to monitor additional inputs:

  • Current loop
  • Strain gauges
  • Pulses (via a counter)

Communication

The logger communication can be achieved by:

  • Direct cable to PC    
  • Data modem – hardwired or mobile
  • Built in logger to logger radio link
  • High powered logger to logger radio link (optional module)
  • Logger to Logger via on board Radio

These options are typically set up in  a fan or daisy chain of loggers on site which communicate with a base station logger connected to a modem on the mobile network. In this configuration data is available on-line.

The basic logger radio is typically capable of 200 to 800 m line of site communication. This range is dependent on site conditions.

Software

Sigra provide software with its loggers that permits administration and data download from a PC under manual control. Software is also available that can be scheduled to undertake automated downloading.

Record on change

The loggers may be programmed to record at a set time interval or to record only if a sensor value differs from the previous value by a configured threshold. This reduces the amount of information to be stored and transmitted.

Alarms

The loggers have an alarm capability that permits them to detect when a value exceeds a threshold value, rate or combination. The logger can then send a warning to a host computer or, if connected by modem, dial a number through the telephone network.

Specifications

field_data_logger

  • Number of Logging Channels:
    • 8 channels for Voltage, Resistance and Frequency
    • 4 channels may be used for Vibrating Wire Sensors
  • Compatible Sensors:
    • Vibrating Wire, 0.5 to 5kHz
    • Voltage output, 0 to 5V
    • Resistance Devices, 0 to 65.6kΩ
    • Frequency, 0.5 to 5kHz
    • Pulse type devices when ftted with optional counter board
  • Analogue to Digital Converter:
    • 16bit with precision voltage reference
  • Radio Range:
    • 200 to 800m typically
  • Operating Radio Frequency:
    • 315.00/433.92 MHz (Country dependent)
    • Does not usually require any licensing arrangements.
    • Aerial:
    • Quarter wave whip. An optional magnetic base mount available for vehicle use.
  • Battery:
    • Rechargeable NiMH or single use Alkaline or Lithium AA cells.
  • Solar Power:
    • Available for general use.
  • Switched Power Out:
    • A 5V supply may be used to power sensors while sampling.
  • Environmental rating:
    • The Sigra Logger is housed in a rugged, waterproof case.
  • Dimensions:
    • 170 x 100 x 60mm plus aerial.
  • Software:
    • For use on PCs running Windows XP or later variations
  • Contact email
    This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Downloads

Please sign in to the site to access download files.

If you are not already registered, you can register via the sign in page.

Image Showcase

for_reservoir_monitoring_br..jpg